Register / Login - Contact Info 

LIFTBEAM (AH38A00-00A-PA) AND STAND (AH38A01-00A-PA)
U.S. Navy called on TANDEMLOC to build a "lightweight" 240,000 lbs capacity lift beam and we answered the call with this newly designed lifter made of T-1 alloy steel, which offers high strength at a lighter weight than low carbon steel. The lifter was proof tested in house to 300,000 lbs., not once but several times, so that each padeye was loaded. We also made a special cradle as requested by the Navy. This lifter is just another example of our versatility and capability!
• WORK LOAD LIMIT (WLL):
Liftbeam: 240,000 LB.
Stand: 3,500 LB (each)
• PROOF TESTED to 125% (300,000 LB) and certified.  All padeyes tested in pairs.
• CALCULATED WEIGHT:
Liftbeam: 7,000 LB.
Stand: 935 LB.
• FINISH: Sandblast, prime and paint safety yellow.
• Standard specification #EAD21000A Applies
  • Designed to meet or exceed ASME B30.20 & BTH-1, Design Cat. B, Service Class 0.
Order Numbers:
AH38A00-00A-PA: Liftbeam
AH38A01-00A-PA: Stand
    Data Plate Information: Important Safety Information for Lifting Equipment
   
• The load should never exceed the working load limit (WLL) specified on the lifter and plate.
• The weight (wt) of the lifter and load should never exceed the rated capacity of the hoist or crane.
• The lifter should be operated by qualified personnel.
• The lifter including all rigging should be visually and mechanically inspected on a scheduled basis by qualified personnel. Defects should be corrected prior to use.
• Any modifications or repairs to the lifter should be made by qualified personnel. If this work is structural, the lifter should be proof or load tested again.
• The lifter should only be used for its designed or designated purpose, and in accordance with manufacture's instructions.
• Personnel should not ride on the lifter, nor place themselves in, under, or directly adjacent to the lifting area.
• A low height test lift should be conducted to confirm lifter function and load stability.
• The lifter load should be balanced such that excessive point loading does not occur.
• All lifting should be done is a smooth, even manner to minimize shock to the lifter and load.
Product Photo
Download / view printer friendly data sheet(s)
Login / register to activate:
TANDEMLOC_AH38A00-00A-PA.pdf
Type: Adobe Acrobat Document
Size: 202 KB
Need Credit? Let us know.
(Note: Credit Applications will only be processed with an accompanying purchase order.)




LIFTBEAM AND STAND


STAND ONLY
Safety Labeling

Safety Labeling - Click to open enlarged view

Read Important Safety Information: Click here

Call Toll-Free: 1-800-258-7324 • Toll-Free Fax: 1-800-892-3273 • info@tandemloc.com • Site Map • Contact Us
TANDEMLOC, Inc · 824 Highway 101 · Havelock, NC 28532 USA · Legal Information

© 2010 Tandemloc, Inc. All rights reserved. All content displayed on this site is either the property of, or used with permission by, Tandemloc, Inc. republication or redistribution of the content, including by framing or similar means, is prohibited without the prior written consent of Tandemloc, Inc. The use of any of the content contained herein by you, or anyone else authorized by you, is prohibited. Any unauthorized use of the content may violate copyright laws, trademark laws, the laws of privacy and publicity and statutes of the U.S. and/or other countries. TANDEMLOC™, TANDEMLOC® logo, and TANDEMLOC AUTOLOC® are the trademarks or registered trademarks of Tandemloc, Inc. Any unauthorized use of these or other Tandemloc, Inc. trademarks is prohibited.

Products include lifting, mobilizing and securing products for below the hook and ISO container handling. Tandemloc provides standard corner fittings, lift beams, spreader bars, pipe end caps, container lifting devices, lifting attachments, twistlocks, d-rings, heavy duty casters, container casters, container lifting dollies and more.

Designed and deployed by Industrial Advertising · Links Page