Register / Login - Contact Info 

FLUSH TIEDOWN RING (S33000A-C00)

The S33000A series tiedown conforms to Mil Std 209. This style incorporates a fully weldable housing that can be flush mounted rather than surface mounted like it's sister tiedown, the S33000E series. It rotates 360 degrees about the vertical plane and 150 degrees horizontal. It will swivel and swing to the load plane within these angles. The tiedown ring will work with hooks or you can lash flat bands to the ring's cross bar. Click here to see the “Large Cargo Tiedown Provision” for greater load capacity.
 
Part Numbers:
S33000A-100Tiedown assembly, self colored.
S33000A-C00Tiedown 1 set of loose components all self colored.(Note 4 applies)
S33000A-C01 Tiedown, 1 set of loose components w/ self-colored housing & galvanized/dacrocote components. (Note 4 applies)
S33000A-C02 Tiedown, 1 set of loose components w/ self-colored housing & galvanized/dacrocote components and split swivel retainer. (Note 4 applies)
• Meets MIL STD 209H - Class 4
• LOAD CAPACITY: 10,000 Lbs. (Single Tension, without yield) 
• Safety Factor to Ultimate Strength (15,000 LB) is 1.5 Min.
• WEIGHT: 6.37 Lbs.
• Tiedown conforms to CLASS 4, MIL STD 209H & Cargo Bed Tiedown provision MIL STD 209J & 209K.
• P/N S33000A-C00, -C01 & -C02:
For ease of installation, components are shipped unassembled. (S33000A-100 is shipped assembled.)
• This tiedown rotates 360° about its vertical axis and a min of 150° about its horizontal axis. It is designed to swivel & swing to the tension load plane of the tiedown within those angles.
• ASSEMBLY: After installing the housing (PC1), assemble PC's 2 to 5 into the configuration shown above. (NOTE: To insert PC 4 pins, rotate PC 2 for proper clearance).
Product Photo
Download / view printer friendly data sheet(s)
Login / register to activate:
TANDEMLOC_S33000A-C00.pdf
Type: Adobe Acrobat Document
Size: 190 KB
Need Credit? Let us know.
(Note: Credit Applications will only be processed with an accompanying purchase order.)


Note W. Installation weld:
The PC 1 swivel body is cast ASTM A27, GR70-40 steel, a low carbon readily weldable steel. Installation welds can be made on any portion of the vertical sides with a continuous 3/16 to 1/4” fillet or bevel weld around the entire body. The weld symbol above is preferred.

Class 5 Tiedowns Available.
Finish is Self-Colored - Other Finishes Available.
LIST OF MATERIALS
PC. # QTY -100 QTY -C00 QTY -C01 QTY- C02 PART NO. AND DESCRIPTION
1 1 1 1 1 S33001A-100 Swivel Housing, Self Colored
2 1 1 - - S33002A-M00 Swivel Retainer, Machined, Self Colored
3 1 1 - - S33003A-100 Tiedown Clevis, Self Colored
4 1 1 - - S33004A-300 Hinge Pin, Steel Self Colored
5 1 1 1 1 SCP0005XXXX0075 Cotter Pin, Stainless Steel
2 - - 1 - S33002A-MGB Swivel Retainer, Mach. Galv/Black Dimetcote
3 - - 1 1 S33003A-1GB Tiedown Clevis, Galv./Black Dimetcote
4 - - 1 1 S33004A-3DL Hinge Pin, Steel Dacromet/Dacrocote Black
2 - - - 1 S33002A-2GB Swiv. Ret., two halve set, Galv., Bl. Dimetcote

Call Toll-Free: 1-800-258-7324 • Toll-Free Fax: 1-800-892-3273 • info@tandemloc.com • Site Map • Contact Us
TANDEMLOC, Inc · 824 Highway 101 · Havelock, NC 28532 USA · Legal Information

© 2010 Tandemloc, Inc. All rights reserved. All content displayed on this site is either the property of, or used with permission by, Tandemloc, Inc. republication or redistribution of the content, including by framing or similar means, is prohibited without the prior written consent of Tandemloc, Inc. The use of any of the content contained herein by you, or anyone else authorized by you, is prohibited. Any unauthorized use of the content may violate copyright laws, trademark laws, the laws of privacy and publicity and statutes of the U.S. and/or other countries. TANDEMLOC™, TANDEMLOC® logo, and TANDEMLOC AUTOLOC® are the trademarks or registered trademarks of Tandemloc, Inc. Any unauthorized use of these or other Tandemloc, Inc. trademarks is prohibited.

Products include lifting, mobilizing and securing products for below the hook and ISO container handling. Tandemloc provides standard corner fittings, lift beams, spreader bars, pipe end caps, container lifting devices, lifting attachments, twistlocks, d-rings, heavy duty casters, container casters, container lifting dollies and more.

Designed and deployed by Industrial Advertising · Links Page