|
Popular products available
for easy purchase... |
|
Buy 'TANDEMLOC
STANDARD ITEMS' Online |
|
CLICK TITLES
FOR COMPLETE PRODUCT INFORMATION and LINKS TO BUY ONLINE |
|
|
|
|
 |
HORIZONTAL CLAMP CONNECTOR (VI-SO), B50 TYPE - 12905BA-1PA
The Horizontal Connector that Rigidly Locks. Fits Side and End
Holes in ISO 1161 Corner Fittings. One side of the connector is
designed to bolt to a structure. The other side engages and
clamps to ISO 1161 Corner fittings. It has been used to connect
antennas or other electronic devices to military shelters. |
|
 |
 |
LIFT LUG FOR
VERTICAL LIFTING - 20901AA-1PA
This lift lug is designed for VERTICAL lifting from the top
corner fitting. It may be used with a master link for your sling
hook or without. According to ISO 1496 and ISO 3874, when
lifting containers from the top corner fittings, the forces must
be vertical to prevent compressive loading to the top rail of
the container. Empty 20' containers may be lifted at an angle. |
|
|
|
 |
LIFT LUG FOR
VERTICAL LIFTING (No Ring) - 20901AA-2PA
Same as 20901AA-1PA (above) but without ring. This lift lug is
designed for VERTICAL lifting from the top corner fitting. It
may be used with a master link for your sling hook or without. |
|
|
|
 |
LIFT LUG WITH
FLEX LINK FOR ANGULAR LIFTING FROM TOP - 20901AA-4PA
This lift lug is designed for angular lift from the top
corner fitting. It incorporates a flex link, (which looks like a
chain connecting link, but it is designed AND TESTED for “hinged
over” lifting), The lug meets ISO 3874. NOTE: ISO 3874 permits
only empty containers to be lifted at an angle from the top
corners." |
|
|
|
 |
WELDABLE D-RINGS
Forged alloy steel "D-Ring" tiedowns with low carbon steel
straps for excellent weldability. 11,700 lbs to 110,000 lbs.
average ultimate breaking strength. |
|
|
|
 |
TWISTLOCK LEFT BLOCKING -
AD54000A
This device is commonly used to stack and lock ISO containers.
The "double cone" Twistloc has been a staple in the maritime
intermodal business for decades. |
|
|
|
 |
WELDABLE FASTMOUNT -
N2501BA
This twistlock may welded to the customer's surface or may be
purchased welded to a variety of base plates which can have
mounting holes for bolt on connection. The Fastmount fits
standard ISO corner fittings and offers a typical loose fit
lock, allowing for accumulating tolerances between container,
corner fitting and the fastmount. For slack-free fit, try the
Vertical VISO's, #K08A00A-1PA. The fastmount may be used on ship
decks or trailers to secure containers. |
|
CAREER OPPORTUNITY AT
TANDEMLOC: Mechanical Engineer, preferably
with experience in the design of below the hook lifting devices.
Please send resumes to Tandemloc, 824 Highway 101, Havelock, NC 28532,
attention Sandy Allen or sandy@tandemloc.com.
