|
|
 |
 |
AE10000A-1GA
- Double Cone Two Position Twistloc with "Preloc"
Feature
This twistloc incorporates tabs on the bottom cone to help guard against accidental dislodgement from the corner fitting during loading and unloading operations. This product is commonly used to connect cargo containers stacked on ships and fits the largest aperture found in ISO 1161 Corner Fittings. It is hot dipped galvanized with stainless steel internal mechanisms. The dimensions shown are for reference. |
|
|
90401SA-CPA
- Height Extender with Shock Absorber
This product was developed for applications where vibration
and shock loading to containers or shelters (with ISO corner
fittings) are to be minimized. The 90401SA-CPA incorporate
Isolation Dynamics M32-600-08-A Isolators. |
|
|
T15000A
- ISO Corner Pulling Twistlock
The T15000A-100 Pulling Twistlock fits the end aperture of the bottom ISO Corner Fitting as well as the side aperture of both top and bottom
ISO Corner Fittings. After
inserting and twistlocking the PC 1 bayonet into the corner fitting, simply
spin the nut to remove the slack to provide a firm, wobble free connection. The long cylindrical body
(PC 2) is weldable. Currently this item is used on military trailers that pull containers up onto their flatbeds for transport. This item may be provided as a kit to facilitate painting or welding into your structure or it may be shipped as an assembled product. |
|
 |
806000N-U00 - Trailoc, Retractable Universal Type w/ Bent
Handle
Originally designed for the United States Marine Corps, this retractable
Twistlock is well suited for flat bed type trailers. When retracted, the
Twistlock is flush with the bed, enabling the flat bed to carry non containerized cargos. A very economical device, the Trailoc, with bent handle and hot dipped galvanized internal castings. |
|
 |
S38000B-1PA - Drop In Twistlock
This very inexpensive Twistlock is easy to install. It remains raised, ready for use. Fits ISO corner fittings and is weldable. |
|
 |
T12000D -
The 3-in-1 Tiedown
The 3-in-1 Tiedown incorporates two Tiedowns per Mil Std 209 and one
Twistlock per ISO 3874 all in one weldable housing. Excellent choice for flatbeds. Built to last with hot dipped galvanized parts. |
|
 |
T12000E -
Screw-Down Twistlock
This Retractable Twistlock incorporates a screw-down feature that provides a tight connection. And, the screw-down feature will not loosen as the design includes a spring loaded “trigger” which captures the spin nut . The screw-down
Twistlock internal sub assembly can be used in our standard Retractable Trailoc Housing, or the
"3 in 1” type Housing, both shown on separate pages. |
|
 |
T42000C - Very Shallow Combo Twistlock & Tiedown Set
The T42000C series Tiedown features a "screwdown" shallow
depth ISO Twistlock and two Mil Std 209 Tie downs, all within
one cast steel weldable housing. This tiedown is beneficial when
space is at a premium. This very shallow design incorporates all
of the same features as the T12000D, including a mechanism to
prevent unwanted "unscrewing" or loosing while the vehicle is
traveling over rough terrain. |
|
 |
12900BA-1PZ - Horizontal Connector
The TANDEMLOC CONNECTOR is an easy and convenient device used for connecting containers, shelters or other structures together horizontally. Containers and shelters outfitted with ISO corner fittings can be clamped together, rigidly, with a
slack-free connection.
BUY ONLINE! |
|
 |
K08A00A-1GA - Vertical Clamp Connector (VI-SO)
The VISO fits ISO 1161 Corner Fitting large aperture and
incorporates a clamping action that removes any slack between
the corner fitting and the body of the connector. Use whenever a
slack free connection is preferred. |
|
|
243000C-BL, BR, TL, TR - Steel Corner Fittings
243000C-SBL, SBR, STL, STR - Stainless Steel Corner Fittings
Our steel corner fittings meet ISO 1161 and are ABS certified. They are available in Top Right, Top Left, Bottom Right and Bottom Left fittings. They are readily weldable. These are the fittings found on all ISO type Containers used in the intermodal shipping arena. They are designed to accept a variety of TANDEMLOC products. They are the fitting to lift from or tiedown from.
The Stainless Steel Corner Fittings meet the dimensional aspects of ISO 1161 and are available in Type 300 series stainless steel. These items are special and may not be available from stock. Please inquire with our sales department for availability. |
|
 |
AH26A00-BL, BR, TL, TR - Aluminum Corner Fitting ISO 1161 Type
Our ALUMINUM CORNER FITTINGS are Designed, Manufactured and
Tested to Meet the Requirements of ISI 1161. These are the
aluminum version of the more common steel corner fittings found
on intermodal containers worldwide. They are available in Top
Right, Top Left, Bottom Right and Bottom Left fittings. They are
readily weldable. These are the fittings found on all ISO type
Containers used in the intermodal shipping arena. They are
designed to accept a variety of TANDEMLOC products. They are the
fitting to lift from or tiedown from. |
|
|
AE14000A-1PA
- Container
Inspection and Maintenance Stand
Our Container Inspection & Maintenance Stand provides the opportunity to support loaded ISO containers high enough to do both container inspections and repairs. The stands connect to the ISO container corner fittings using Tandemloc connecting devices known as
twistlocks, which are the accepted method of connecting containers to ships and trailers. Each stand has a capacity of 40,000 lbs for a total load capacity of 80,000 lbs with winds of up to 15 miles per hour. These are high quality stands ruggedly built of heavy structural materials with a minimum yield factor of 3:1. They are painted safety yellow for excellent visibility. |
|
|
77004S
- Steel Container Pedestal
Many military containers such as Mil-Vans, the old "Conex
Boxes" as well as some Tricons, Sixcons and Quadcons are 8'
tall. However, many commercial containers are 8'-6". If
combinations of military containers and commercial containers
are shipped together, the overall heights of stacked containers
can differ from one another and this could create a problem for
lashing. The pedestal is also useful with open top containers
and flatracks where cargo is projecting above the top of the
corner fittings, hampering stacking or lifting. Tandemloc offers
a proof tested version as well, which can be used in lifting
applications. |
|
|
|
|
Call Toll-Free: 1-800-258-7324 • Toll-Free Fax:
1-800-892-3273 • info@tandemloc.com
• Site Map • Contact Us
TANDEMLOC, Inc · 824 Highway 101 · Havelock, NC 28532 USA ·
Legal Information
© 2009 Tandemloc, Inc. All rights reserved. All content displayed on
this site is either the property of, or used with permission by,
Tandemloc, Inc. republication or redistribution of the content,
including by framing or similar means, is prohibited without the prior
written consent of Tandemloc, Inc. The use of any of the content
contained herein by you, or anyone else authorized by you, is
prohibited. Any unauthorized use of the content may violate copyright
laws, trademark laws, the laws of privacy and publicity and statutes of
the U.S. and/or other countries.
TANDEMLOC™, TANDEMLOC® logo, and TANDEMLOC AUTOLOC® are the trademarks
or registered trademarks of Tandemloc, Inc. Any unauthorized use of
these or other Tandemloc, Inc. trademarks is prohibited.
Products include lifting, mobilizing and securing products for below the
hook and ISO container handling. Tandemloc provides
standard corner fittings, lift beams, spreader bars, pipe end caps,
container lifting devices, lifting attachments, twistlocks, d-rings, heavy duty casters, container casters, container lifting dollies and more.
Designed and deployed by Industrial Advertising ·
Links Page |
|
|
